View MTG-EZW_4853701.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cld-ds36 rev 2 product family data sheet/ binning and labeling document cree ? xlamp ? mt-g easywhite? leds www.cr ee.com/xlamp copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. product description the xlamp mt-g e asywhite led maximizes lumen density, elimi - nates chromaticity binning, and enables luminaire and bulb manu - facturers to deliver consistent color and high effcacy light output in a new, compact, multi-die package. xlamp mt-g e asywhite le ds can reduce l ed-to-le d color variation to within a 2-step macadam ellipse, 94% smaller than the total area of the corresponding ansi c78.377 color region. the xlamp mt-g e asywhite le d is the perfect choice for lighting ap - plications where high luminous fux output is required from a single, small point source. e xample appli- cations include: led retroft bulbs, commercial/retail display spot - lights, and other indoor general il - lumination applications. features ? cree easywhite color temperatures ? wide range of operating power - up to 25w ? 85 c binning and characterization ? two voltage options: 6 v , 36v ? low effective thermal resistance: 1.5 c/w ? high lumen density ? wide viewing angle: 120 ? minimum 80 cri at 2700 k and 3000 k cct ? e lectrically neutral thermal path applications ? mr, par and other directional retroft bulbs ? commercial/residential direc - tional lighting ? general indoor/outdoor illumi - nation table of contents cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/xlamp copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks and e asywhite is a trademark of cree, inc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 label with cree b in code, qty, lot # ...................................... 10 label with customer order code, .. 10 qty, reel id, po# .......................... 10 product characteristics ............... 2 flux characteristics, standard order codes and bins ................ 2 relative spectral power distribution ............................... 3 relative luminous flux vs junction temperature ............................. 4 e lectrical characteristics ............. 4 relative luminous flux vs current .................................... 5 typical spatial distribution .......... 6 performance groups C brightness ................................ 7 performance groups C chromaticity ............................. 7 cree easywhite color temperatures ........................... 8 bin and order code format ......... 9 standard order codes and bins ... 9 notes ...................................... 10 refow soldering characteristics . 11 mechanical dimensions .............. 12 tape and reel .......................... 13 packaging ................................ 14
2 2 product characteristics characteristics unit minimum typical maximum viewing angle (fwhm) degrees 120 esd classifcation (hbm per mil-std-883d) class 2 e ffective thermal resistance, junction to solder-point c/w 1.5 le d junction temperatures c 150 dc forward current (6 v) ma 1100 4000 dc forward current (36 v) ma 185 700 forward v oltage (6v , 1100 ma, 85 c) v 5.6 6.7 forward v oltage (36v , 185 ma, 85 c) v 33.5 40.2 temperature coeffcient of voltage (6v) mv/ c -4.5 temperature coeffcient of voltage (36v) mv/ c -27 reverse v oltage (6v) v -5 reverse current (6 v , 36v) ma 0.1 moisture sensitivity level rating (msl) msl 1 flux characteristics, standard order codes and bins, 6 volt mt-g (1100 ma, t j =85 c) the following table provides several base order codes for 6 v olt xlamp mt-g e asywhite le ds. for a complete description of the order-code nomenclature, please reference page 9 of this document. color cct range base order codes min luminous flux (lm) (tj =85 c) 2-step order code 4-step order code group flux (lm) chromaticity region chromaticity region standard cri easywhite 4,000 k f0 480 40h mtg e zw-00-0000-0b00f040h 40f mtg e zw-00-0000-0b00f040f g0 520 mtg e zw-00-0000-0b00g040h mtg e zw-00-0000-0b00g040f h0 560 mtg e zw-00-0000-0b00h040h mtg e zw-00-0000-0b00h040f 3,500 k e0 440 35h mtg e zw-00-0000-0b00e035h 35f mtg e zw-00-0000-0b00e035f f0 480 mtg e zw-00-0000-0b00f035h mtg e zw-00-0000-0b00f035f g0 520 mtg e zw-00-0000-0b00g035h mtg e zw-00-0000-0b00g035f 3,000 k e0 440 30h mtg e zw-00-0000-0b00e030h 30f mtg e zw-00-0000-0b00e030f f0 480 mtg e zw-00-0000-0b00f030h mtg e zw-00-0000-0b00f030f g0 520 mtg e zw-00-0000-0b00g030h mtg e zw-00-0000-0b00g030f 2,700 k d0 400 27h mtg e zw-00-0000-0b00d027h 27f mtg e zw-00-0000-0b00d027f e0 440 mtg e zw-00-0000-0b00e027h mtg e zw-00-0000-0b00e027f f0 480 mtg e zw-00-0000-0b00f027h mtg e zw-00-0000-0b00f027f notes: ? cree maintains a tolerance of 7% on fux and power measurements and 2 on cri measurements ? minimum cri for e asywhite color temperatures 27f, 27h, 30f, 30h is 80 ? minimum cri for e asywhite color temperatures 35f, 35h, 40f, 40h is 77 ? typical cri for e asywhite color temperatures 35f, 35h, 40f, 40h is 80 xlamp mt-g easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks and easywhite is a trademark of cree, inc.
3 3 flux characteristics, standard order codes and bins, 36 volt mt-g (185 ma, t j =85 c) the following table provides several base order codes for 36 v olt xlamp mt-g e asywhite le ds. for a complete descrip- tion of the order-code nomenclature, please reference page 9 of this document. color cct range base order codes min luminous flux (lm) (tj =85 c) 2-step order code 4-step order code group flux (lm) chromaticity region chromaticity region standard cri easywhite 4,000 k f0 480 40h mtg e zw-00-0000-0n00f040h 40f mtg e zw-00-0000-0n00f040f g0 520 mtg e zw-00-0000-0n00g040h mtg e zw-00-0000-0n00g040f h0 560 mtg e zw-00-0000-0n00h040h mtg e zw-00-0000-0n00h040f 3,500 k e0 440 35h mtg e zw-00-0000-0n00e035h 35f mtg e zw-00-0000-0n00e035f f0 480 mtg e zw-00-0000-0n00f035h mtg e zw-00-0000-0n00f035f g0 520 mtg e zw-00-0000-0n00g035h mtg e zw-00-0000-0n00g035f 3,000 k e0 440 30h mtg e zw-00-0000-0n00e030h 30f mtg e zw-00-0000-0n00e030f f0 480 mtg e zw-00-0000-0n00f030h mtg e zw-00-0000-0n00f030f g0 520 mtg e zw-00-0000-0n00g030h mtg e zw-00-0000-0n00g030f 2,700 k d0 400 27h mtg e zw-00-0000-0n00d027h 27f mtg e zw-00-0000-0n00d027f e0 440 mtg e zw-00-0000-0n00e027h mtg e zw-00-0000-0n00e027f f0 480 mtg e zw-00-0000-0n00f027h mtg e zw-00-0000-0n00f027f notes: ? cree maintains a tolerance of 7% on fux and power measurements and 2 on cri measurements ? minimum cri for e asywhite color temperatures 27f, 27h, 30f, 30h is 80 ? minimum cri for e asywhite color temperatures 35f, 35h, 40f, 40h is 77 ? typical cri for e asywhite color temperatures 35f, 35h, 40f, 40h is 80 relative spectral power distribution (6v, 1100 ma; 36v, 185 ma; t j =85c; 3000k cct) the following graph represents typical spectral output of the xlamp mt-g easywhite le d. relative spectral power distribution white the following graph represents typical spectral output of each die of the mt-g this is xr-e data, and mc-e data 0 20 40 60 80 100 400 450 500 550 600 650 700 750 relative spectral power (%) wavelength (nm) xlamp mt-g easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks and easywhite is a trademark of cree, inc.
4 4 relative luminous flux vs junction temperature (6v, 1100 ma; 36v, 185 ma) the following graph represents typical performance of the xlamp mt-g easywhite le d. electrical characteristics (t j = 85c) relative flux output vs. junction temperature (if = 1100 ma, or 183.33 if @ 36v) the following graph represents typical performance of each led die in the xlamp mt-g 0% 20% 40% 60% 80% 100% 120% 20 40 60 80 100 120 140 relative luminous flux junction temperature (oc) electrical characteristics (tsp = 85oc) 6v 0 500 1000 1500 2000 2500 3000 3500 4000 5 5.25 5.5 5.75 6 6.25 current (ma) forward voltage v mt - g 6v xlamp mt-g easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks and easywhite is a trademark of cree, inc.
5 5 relative luminous flux vs current (t j = 85c) 36v 0 100 200 300 400 500 600 700 31.00 32.00 33.00 34.00 35.00 36.00 37.00 38.00 current (ma) forward voltage v mt - g 36v relative intensity vs. current (tsp = 85oc) 0% 50% 100% 150% 200% 250% 300% 0 500 1000 1500 2000 2500 3000 3500 4000 relative luminous flux (%) forward current, pulsed (ma) mt - g 6v xlamp mt-g easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks and easywhite is a trademark of cree, inc.
6 6 typical spatial distribution the following graph represents typical performance of the xlamp mt-g easywhite le d. spatial distribution 0 20 40 60 80 100 - 90 - 60 - 30 0 30 60 90 relative luminous intensity (%) angle (o) relative flux output vs. junction temperature (if = 1100 ma, or 183.33 if @ 36v) 0% 50% 100% 150% 200% 250% 300% 0 100 200 300 400 500 600 700 relative luminous flux (%) forward current, pulsed (ma) mt - g 36v xlamp mt-g easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks and easywhite is a trademark of cree, inc.
7 7 performance groups C brightness (t j = 85c) xlamp mt-g easywhite le ds are tested for luminosity and placed into one of the following bins. group code min. luminous flux @ 1100 ma, 6v; @185 ma, 36v max. luminous flux @ 1100 ma, 6v; @185 ma, 36v d0 400 440 e0 440 480 f0 480 520 g0 520 560 h0 560 600 j0 600 650 performance groups C chromaticity (t j = 85c) xlamp mt-g easywhite leds are tested for chromaticity and placed into one of the regions defned by the following bounding coordinates. easywhite color temperatures C 2-step code cct x y 40h 4000 k 0.3784 0.3741 0.3804 0.3818 0.3867 0.3857 0.3844 0.3778 35h 3500 k 0.4030 0.3857 0.4061 0.3941 0.4132 0.3976 0.4099 0.3890 30h 3000 k 0.4291 0.3973 0.4333 0.4062 0.4395 0.4084 0.4351 0.3994 27h 2700 k 0.4528 0.4046 0.4578 0.4138 0.4638 0.4152 0.4586 0.4060 easywhite color temperatures C 4-step code cct x y 40f 4000 k 0.3744 0.3685 0.3782 0.3837 0.3912 0.3917 0.3863 0.3758 35f 3500 k 0.3981 0.3800 0.4040 0.3966 0.4186 0.4037 0.4116 0.3865 30f 3000 k 0.4242 0.3919 0.4322 0.4096 0.4449 0.4141 0.4359 0.3960 27f 2700 k 0.4475 0.3994 0.4573 0.4178 0.4695 0.4207 0.4589 0.4021 xlamp mt-g easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks and easywhite is a trademark of cree, inc.
8 8 cree easywhite color temperatures plotted on the 1931 cie curve (t j = 85c) 2700k 3000k 3500k 4000k 4500k 40f 35f 30f 27f 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 ccy ccx ansi c78.377 quadrangle easywhite "f" (4 - step) chromaticity regions 2700k 3000k 3500k 4000k 4500k 40h 35h 30h 27h 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 ccy ccx ansi c78.377 quadrangle easywhite "h" (2 - step) chromaticity regions xlamp mt-g easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks and easywhite is a trademark of cree, inc.
9 9 bin and order code format bin codes and order codes are confgured as follows: order code bin code standard order codes and bins (xlamp mt-g easywhite) xlamp mt-g easywhite led standard order codes min. luminous flux (lm) @ tj=85c, 6v, 1100 ma @ tj=85c, 36v, 185 ma chromaticity regions 6v order code 36v order code group flux (lm) easywhite d0 400 27f mtg e zw-00-0000-0b00d027f mtg e zw-00-0000-0n00d027f 27h mtg e zw-00-0000-0b00d027h mtg e zw-00-0000-0n00d027h e0 440 27f mtg e zw-00-0000-0b00e027f mtg e zw-00-0000-0n00e027f 27h mtg e zw-00-0000-0b00e027h mtg e zw-00-0000-0n00e027h 30f mtg e zw-00-0000-0b00e030f mtg e zw-00-0000-0n00e030f 30h mtg e zw-00-0000-0b00e030h mtg e zw-00-0000-0n00e030h 35f mtg e zw-00-0000-0b00e035f mtg e zw-00-0000-0n00e035f 35h mtg e zw-00-0000-0b00e035h mtg e zw-00-0000-0n00e035h f0 480 27f mtg e zw-00-0000-0b00f027f mtg e zw-00-0000-0n00f027f 27h mtg e zw-00-0000-0b00f027h mtg e zw-00-0000-0n00f027h 30f mtg e zw-00-0000-0b00f030f mtg e zw-00-0000-0n00f030f 30h mtg e zw-00-0000-0b00f030h mtg e zw-00-0000-0n00f030h 35f mtg e zw-00-0000-0b00f035f mtg e zw-00-0000-0n00f035f 35h mtg e zw-00-0000-0b00f035h mtg e zw-00-0000-0n00f035h 40f mtg e zw-00-0000-0b00f040f mtg e zw-00-0000-0n00f040f 40h mtg e zw-00-0000-0b00f040h mtg e zw-00-0000-0n00f040h g0 520 30f mtg e zw-00-0000-0b00g030f mtg e zw-00-0000-0n00g030f 30h mtg e zw-00-0000-0b00g030h mtg e zw-00-0000-0n00g030h 35f mtg e zw-00-0000-0b00g035f mtg e zw-00-0000-0n00g035f 35h mtg e zw-00-0000-0b00g035h mtg e zw-00-0000-0n00g035h 40f mtg e zw-00-0000-0b00g040f mtg e zw-00-0000-0n00g040f 40h mtg e zw-00-0000-0b00g040h mtg e zw-00-0000-0n00g040h h0 560 40f mtg e zw-00-0000-0b00h040f mtg e zw-00-0000-0n00h040f 40h mtg e zw-00-0000-0b00h040h mtg e zw-00-0000-0n00h040h sss ccc -bb-hhhh-nnnnnnnnn series mt g = mt -g internal code internal code kit code vf class: b0 = 6- v class n0 = 36- v clas s r eel size 0 = 500 (standard) 1 = 100 (nonstandard) color ezw = easywhite sss ccc -bb- www -ff-nnraaaa series mt g = mt -g internal code flux bin cri specification h = 80 min cr i e = 77 min cr i internal code vf class: b0 = 6- v class n0 = 36- v class chromaticity bin color ezw = easywhite xlamp mt-g easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks and easywhite is a trademark of cree, inc.
10 10 notes moisture sensitivity in testing, cree has found xlamp mt-g easywhite leds to have unlimited foor life in conditions 30oc / 85% relative humidity (rh). moisture testing included a 168 hour soak at 85oc / 85% rh followed by 3 refow cycles, with visual and electrical inspections at each stage. rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or other - wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with e u directive 2002/95/ e c on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim warning. do not look at exposed l e d lamps in operation. e ye injury can result. for more information about le ds and eye safety, please refer to the cree l ed e ye safety application note (http://www.cree.com/products/pdf/xlamp_e ye- safety.pdf). xlamp mt-g easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks and easywhite is a trademark of cree, inc.
11 11 reflow soldering characteristics in testing, cree has found xlamp mt-g e asywhite le ds to be compatible with jede c j-std-020c, using the param - eters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle pro - vided by the manufacturer of solder paste used. note that this general guideline may not apply to all pcb designs and confgurations of refow soldering equipment. profle feature lead-based solder lead-free solder average ramp-up rate (ts max to tp) 3c/second max. 3c/second max. preheat: temperature min (ts min ) 100c 150c preheat: temperature max (ts max ) 150c 200c preheat: time (ts min to ts max ) 60-120 seconds 60-180 seconds time maintained above: temperature (t l ) 183c 217c time maintained above: time (t l ) 60-150 seconds 60-150 seconds peak/classifcation temperature (tp) 215c 260c time within 5c of actual peak temperature (tp) 10-30 seconds 20-40 seconds ramp-down rate 6c/second max. 6c/second max time 25c to peak temperature 6 minutes max. 8 minutes max. note: all temperatures refer to the topside of the package, measured on the package body surface. xlamp mt-g easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks and easywhite is a trademark of cree, inc.
12 12 mechanical dimensions all measurements are .13 mm unless otherwise indicated. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 9.113 9.113 .650 4.85 .25 r 4.100 8.90 .950 .500 6.000 8.90 8.900 8.900 6.000 .950 .950 .500 .500 6.198 .889 1.090 1.905 1.072 1.905 8.839 .889 .937 .937 1.722 3.175 3.175 1.090 8.072 1 / 1 9.000 c 2610-00011 tiger 9191 outline 10/8/10 d. cronin revisons rev description by date app'd a initial release dc 10/8/10 b changed solder pad view dc 1/11/11 c added stencil view dc 2/18/11 recommended pc board solder pad recommended stencil pattern size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 9.113 9.113 .650 4.85 .25 r 4.100 8.90 .950 .500 6.000 8.90 8.900 8.900 6.000 .950 .950 .500 .500 6.198 .889 1.090 1.905 1.072 1.905 8.839 .889 .937 .937 1.722 3.175 3.175 1.090 8.072 1 / 1 9.000 c 2610-00011 tiger 9191 outline 10/8/10 d. cronin revisons rev description by date app'd a initial release dc 10/8/10 b changed solder pad view dc 1/11/11 c added stencil view dc 2/18/11 recommended pc board solder pad recommended stencil pattern size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 8.90 8.90 .650 4.85 .25 r 4.100 8.90 .950 .500 6.000 8.90 8.900 8.900 6.000 .950 .950 .500 .500 6.198 .889 1.090 1.905 1.072 1.905 8.839 .889 .937 .937 1.722 3.175 3.175 1.090 8.072 1 / 1 9.000 d 2610-00011 tiger 9191 outline 10/8/10 d. cronin revisons rev description by date app'd a initial release dc 10/8/10 b changed solder pad view dc 1/11/11 c added stencil view dc 2/18/11 d changed overall dim to match cut length and width dc 3/25/11 recommended pc board solder pad recommended stencil pattern size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 8.900 8.900 6.000 .950 .950 .500 .500 6.198 .889 1.090 1.905 1.072 1.905 8.839 .889 .937 .937 1.722 3.175 3.175 1.090 8.072 8.90 8.90 4.85 .25 r 4.100 .650 8.90 8.90 .950 .500 6.000 1 / 1 9.000 a 2610-00016 36v mt-g outline 10/8/10 d. cronin revisons rev description by date app'd a initial release dc 6/16/11 recommended pc board solder pad recommended stencil pattern mt-g 6 v mt-g36 v xlamp mt-g easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks and easywhite is a trademark of cree, inc.
13 13 tape and reel size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contaned within are the proprietary and cree confidential. this plot and the information of cree inc. notice surface finish: 63 330 +.25 -.75 12.4 +1.0 -.5 measured at edge 16.4 +0.2 .0 measured at hub 12.4 +.2 .0 measured at hub .2 13.1 1.9.4 .4 21 60 60 1 / 1 0.500 a 2400-00009 reel, 13" x 12mm, 3 piece snap - anti-static hips -- -- -- -- 09/29/09 d. cronin 2400-00009 index qty item comments 1 1 2400-00009-core 2 2 2400-00009-reel revisons rev description by date app'd size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 trailer 160mm (min) of empty pockets sealed with tape (15 pockets min.) loaded pockets (500 lamps) 12.1 5.25 16 +.3 -.0 1.75 .10 4.10 leader 400mm (min) of empty pockets sealed with tape (35 pockets min.) 9.4 1 / 1 3.000 a 2402-00016 mtg loading spec -- -- -- -- -- -- 1/28/11 d. cronin revisons rev description by date app'd end start user feed direction cathode side anode side 1.5 .1 xlamp mt-g easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks and easywhite is a trademark of cree, inc.
14 14 packaging cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag p atent label label with customer order code, q t y , r eel i d , po # cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # desiccant (inside bag) humidity indicator (inside bag) label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag dessicant (inside bag) humidi t y indicator card (inside bag) p atent label label with customer order code, q t y , r eel i d , po # label with customer order code, qty, reel id, po# label with cree bin code, qty, lot # xlamp mt-g easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks and easywhite is a trademark of cree, inc.

▲Up To Search▲

Price & Availability of MTG-EZW

	To Download MTG-EZW Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .